Call Today: 1300 046 832

Aqualis Composite Wood

Aqualis Composite Bright - No Fuss includes an easy to use hose attachment and is a water-based general purpose composite wood conditioner treatment to be applied as often as required to maintain a fresh, clean look to all composite decks, stairs, hand rails, cladding, screening, furniture etc

Featuring an easy to use hose attachment so that all you have to do is plug your hose in and it automatically mixes the correct amount of water : concentrate – no fuss.

A Conditioner and brightener for all raw wood/plastic Composite substrates. It has been designed to remove dirt and grime, tree sap, food stains, oil and minor oxidative degradation from composite surfaces. Used as a precursor to treatment with Aqualis Composite Sealer. Excellent around the house especially for cleaning oil and grease from BBQ’s and concrete.

Application

Extreme: Severe dirt and grime soiling, heavy oxidation, accumulated BBQ stains and or tree Sap build up.

  1. Dilute 1 part Composite Bright to 4 parts water by volume.
  2. Pre-wet composite surface with fresh water
  3. Apply diluted Composite Bright mix by mop or spray and allow soaking in for at least 2-3 min. For stubborn stains allow 5 – 10 min
  4. Scrub surface with a stiff broom or mechanical agitator
  5. Thoroughly rinse off with water

Moderate: Removal of dirt, light oxidation, fresh BBQ stains and light build-up of tree sap.

  1. Pre-wet area to be cleaned with fresh water.
  2. Dilute 1 part Composite Bright to 8 parts water by volume.
  3. Apply diluted Composite Bright mix by mop or spray and allow soaking in for at least 2-3 min. For stubborn stains allow 5 – 10 min
  4. Scrub surface with a stiff broom or mechanical agitator
  5. Thoroughly rinse off with water

Light: General cleaning and up-keep.

  1. Dilute 1 part Composite Bright to 10 parts water by volume.
  2. Pre-wet composite surface with water
  3. Apply diluted Composite Bright mix by mop or spray and allow soaking in for at least 2-3 min. For stubborn stains allow 5 – 10 min
  4. Scrub surface with a stiff broom or mechanical agitator
  5. Thoroughly rinse off with water

Coated Composite: General cleaning and up-keep.

  1. Dilute 1 part Composite Bright to 20 parts water by volume.
  2. Pre-wet composite surface with water.
  3. Apply diluted Composite Bright mix by mop or spray and allow soaking in for at least 2-3 minutes. For stubborn stains allow 5-10 minutes.
  4. Scrub the surface with a soft bristle broom.
  5. Thoroughly rinse off with water.

Maintenance

It is recommended that composite wood be treated with Composite Bright at least every 3 to 6 months depending on location and density of surrounding trees and native wildlife. For areas exposed to heavy soiling, frequency of treatment will need to be at shorter intervals to maintain a natural looking substrate. For improved protection against stains and fungal growth refer to Aqualis Composite Sealer.


Composite Bright - No Fuss
Designed For Use With:
Composite Woods
$49.50
price includes 10% GST
$49.50
price includes 10% GST
Where To Use:

All raw wood/plastic Composite substrates, including oil & grease removal from BBQ's and concrete

Coverage m²/L:

Diluted Mixture 10 m2/lt

Clean Up:

Water

Available Sizes

3.5 Litres

Size: *

$49.50
price includes 10% GST
$49.50
price includes 10% GST

You May Also Be Interested In:

The complete kit with everything you need to prepare and stain a deck, except the paint!
$35.65
was $35.65

Aqualis Composite Bright is a water-based general purpose composite wood conditioner treatment to be applied as often as...
$59.99
was $59.99

Hand paint mixers, drill mixers and everything you need to get your paint mixed and prepared for application
$2.92
was $2.92